Sunday, March 21, 2010


Snow day - Part 1

So after getting the splice glued onto the side, I realigned the fingerboard and clamped it up again, this time much more slowly and methodically so the clamps didn't pull the fingerboard sideways.

And here it is out of the clamps a few hours later. This time I used 2 small finishing nails as alignment pins, drilled through fret slots.

And again to the band saw to trim down the splice close to the fingerboard with this little fence I made for the band saw.

And here it is, ready for carving.

Posted by Picasa

Comments: Post a Comment

<< Home

This page is powered by Blogger. Isn't yours?